Fleetbridge FPT-5210 User GuideUpdated 3 months ago

Battery Life & Functionality

• Motion Activated: The FPT-5210 starts tracking when motion is detected and enters sleep mode when stationary for four minutes.
• Tracking Intervals: It transmits location updates according to your chosen plan, even during sleep mode.
• Battery Life: Expect:
  • 2 days with very active tracking
  • 3-5 days with moderately active tracking
  • Up to 7 days with minimal activity

Turning the Device On/Off

• Power On:
  • Press and hold the power key for 3 seconds (PWR LED turns on).
  • Alternatively, connect the device to a charger (PWR LED turns on automatically).
• Power Off:
  • Press and hold the power key for 2 seconds (PWR LED flashes then turns off). The device may take up to 90 seconds to fully power down.

Charging

• The FPT-5210 uses a standard AC-DC power adapter (approximately 5 hours for a full charge).
• You can also charge using a USB cable connected to a computer.
• Monitor battery level and receive charging notifications through the Fleetbridge mobile app or web platform.

LED Status Lights

Understanding the LED lights can help diagnose FPT-5210 functionality:

• Green (flashing every 3 seconds): Device is on
• Blue: GPS signal
• Red (PWR): Power status
• Green (CEL): Cellular connectivity (refer to Fleetbridge resources for detailed information)

Troubleshooting

For any issues beyond what's covered here, contact Fleetbridge support.

Safety Information

• Do not disassemble the device.
• Avoid extreme temperatures, high humidity, and direct sunlight.
• Do not use the FPT-5210 on airplanes or near medical equipment.